6505 raw tail.wav

The first of a new sample pack hot out of the oven. These samples were created yesterday, 05-Sep-2009.Recently I have taken interest in amp modelling (simulating guitar amps) through VST plug ins.For anyone interesting can load up the great free guitar amps from:http://www.acmebargig.com/and also Boogex from voxengo, which is also free:http://www.voxengo.com/product/boogex/Anyway... the samples in this sample pack deal with an interesting glitch effect I found on the 6505 and 6505+ amp models on another piece of software: Revalver.In these amp models there is a slight noise as the sound dies out (you may need to sample the output and amplify it on a sample editor to notice it).That is precisely what I did to create this sample.This appears at the tail of any sound, after the sound input to the amp has died out. I suspect this would not show up if I was feeding the amp with an actual guitar sound due to the small level of in-line noise. But I was feeding the amp with a short drum sample just to create this glitch effect.I used a reverse gate in Ableton Live to cut out the main part of the sound (the drum sample) which would be too loud and increased the gain so the tail sound was clearly audible.