I chained my two Arturia MicroBrutes together by running the Gate Out of Brute A to the Gate In of Brute B, the Pitch out of Brute A to the Pitch In on the Mod Matrix of Brute B & the Audio Out from Brute B to the Audio In of Brute A.
So I had a 2 Oscillator Synth, whereas before I had only a single Oscillator :]
The only drawback was that the B Synth wass responding pitched up quite a ways & I missed out on the Duophonic potential this set up would have, were I to control the B Synth via MIDI in.
But I figured out another way.
I ran both of the MicroBrutes USB/MIDI into my LapTop... & used one of them as a MIDI controller for BOTH... & then ran the Audio of the second Brute into the first... then the combined audio of the first & second out into my interface√
Much better results!
Here’s another series of recordings I made with the 3rd patch I tuned in this experiment. There are two Octaves of Single Notes, an "Octave per Voice" kind of Duophonic sort of thing & some Filter Sweeps.
I hope you find this useful :]
Type
AIFF (.aiff)
Duration
1:38.121
File size
27.0 MB
Sample rate
48000.0 Hz
Bit depth
24 bit
Channels
Stereo
