This is the SG90 Micro Servo, hooked up to an Arduino circuit I made so I can control the position of the servo with a potentiometer. Recorded very …
G
gpag1
May 30th, 2020
May 30th, 2020
Several variations of hits on this wind chime. First section are organic strikes, followed by hits with metal mallet. Last are muted hits.
G
gpag1
May 4th, 2020
May 4th, 2020
You thought "big fridge hum sound.wav" was popular, well now check out version 2! It's a 15 year old Sears fridge, recorded with a Shure KSM141 in cardioid. …
G
gpag1
May 4th, 2020
May 4th, 2020
Airplane passing overhead, 50s sounding engine. Lots of sub rumble, very dynamic sound effect. Sounds very close, like the plane is passing barely above.
G
gpag1
May 14th, 2017
May 14th, 2017
One satisfying thunder crack, followed by it's rumbly aftermath, as well as a car passing on the street in the distance. There is no compression or EQ applied, …
G
gpag1
May 14th, 2017
May 14th, 2017
Classic Frigidaire (Electrolux) fridge turning on. It runs a cycle for about 6.5 minutes, making a few noises along the way, and then turns off and cools down. …
G
gpag1
May 14th, 2017
May 14th, 2017
Foley footsteps performed with boots on a wood stage floor. Recorded with AT875R.
G
gpag1
May 14th, 2017
May 14th, 2017
Foley footsteps done with a tap shoe. Recorded with AT875R on a wood stage floor.
G
gpag1
May 14th, 2017
May 14th, 2017
Airplane passing overhead, 50s sounding engine. Not as much low end or dynamic contrast as the regular 'flying overhead' file.
G
gpag1
May 14th, 2017
May 14th, 2017
Several different screams that can be used for monsters/monster sound effects. I recorded these with my voice and a Neumann TLM 102, and processed them heavily. There is …
G
gpag1
May 6th, 2017
May 6th, 2017
Recording of a soda can being opened. This was a 10 oz aluminum soda can, recorded with AT875R.
G
gpag1
April 21st, 2017
April 21st, 2017
Recording of drinking from a soda can. Includes sipping drink, swallowing, and exhaling. This was a 10 oz can. Recorded in small iso booth with AT875R.
G
gpag1
April 21st, 2017
April 21st, 2017