Struck from the bottom again whilst hanging vertically from 1 wire, the 11 1/2" bowl were struck on the bottom with the plastic insulated handle of the needlenose …
Molindarius
October 11th, 2022
October 11th, 2022
Having a 1 1/2" hard plastic Bocce ball (a wonderful Italian yard game) nearby, I thought I'd try tossing it into the bowl, held in the air horizontally …
Molindarius
October 11th, 2022
October 11th, 2022
I struck the rim whilst the bowl was hanging vertically from 1 wire. The Shure SM58 mic held approximately 8" away from the interior of the bowl.
Molindarius
October 11th, 2022
October 11th, 2022
Struck from the bottom again whilst hanging vertically from 1 wire, the 11 1/2" bowl were struck on the bottom with the needlenose pliers, with the Shure SM58 …
Molindarius
October 11th, 2022
October 11th, 2022
Struck from the bottom again whilst hanging vertically from 1 wire, the 11 1/2" bowl were struck on the bottom with the needlenose pliers, with the Shure SM58 …
Molindarius
October 11th, 2022
October 11th, 2022
These samples are from the 11 1/2" sized commercial stainless steel mixing bowl. The bowl was suspended sideways from a single hooked wire, for the smallest deadening of …
Molindarius
October 11th, 2022
October 11th, 2022
I struck the bottom of a wire suspended 9 1/2-inch pressed steel commercial mixing bowl. I struck the bowl's bottom with a pair of 8-inch Channellock steel pliers. …
Molindarius
October 11th, 2022
October 11th, 2022
I struck the bottom of a wire suspended 9 1/2-inch pressed steel commercial mixing bowl. I struck the bowl's bottom with a pair of 8-inch Channellock steel pliers. …
Molindarius
October 11th, 2022
October 11th, 2022
I dropped a solid plastic 1 1/2-inch ball into the 9 1/2-ball at enough of an angle to give a little bit of a rolling action. The audio …
Molindarius
October 11th, 2022
October 11th, 2022
I struck the rim of a wire suspended 9 1/2-inch pressed steel commercial mixing bowl. I struck the bowl's rim with a pair of 8-inch Channellock steel pliers. …
Molindarius
October 11th, 2022
October 11th, 2022
I struck the lid of a Lagostina M96A tea pot using 8-inch Channellock steel pliers. I sampled the strike twice, using medium and heavy speed. The audio was …
Molindarius
October 11th, 2022
October 11th, 2022
I struck the lid of a Lagostina M96A tea pot using 8-inch Channellock steel pliers. I sampled the strike twice, using medium and heavy speed. The audio was …
Molindarius
October 11th, 2022
October 11th, 2022